1、所有工序都為蝕刻模。
2、蝕刻模刀鋒需鋒利、無披鋒、毛刺, 版面平整、不能厚薄不均勻。
3、蝕刻模具未注尺寸公差為±0.03mm,刀板尺寸除外。
4、蝕刻模高1.5mm,板厚0.5mm,總高度2.0mm,配6mm鋁板,鋁板需光滑平整。
1. All processes are etching molds.
2. The blade of the etching mold must be sharp, free of burrs, and flat, without uneven thickness.
3. The uninjected dimension tolerance of the etching mold is ±0.03mm, except for the blade size.
4. The height of the etching mold is 1.5mm, the thickness of the plate is 0.5mm, and the total height is 2.0mm. It is equipped with 6mm aluminum plate, which needs to be smooth and flat.
新工藝與傳統工藝效果對比數據分析New Technology and Traditional Technology Effect Comparison Data Analysis | ||||
類別 Category/工藝 Process | 換孔工藝 Hole-replacement Technology | VS | 漢堡工藝 Hamburg process | |
設備 Equipment | 10臺 10pieces | VS | 8臺 8pieces | |
生產產能 Production Capacity | 2K/小時 2k/hour | VS | 4K/小時 4k/hour | |
良品 Non-defective Products | 80% 80% | VS | 95% 95% | |
材料利用率 Stock Utilization | 70% 70% | VS | 98% 98% | |
生產工人 Production Workers | 6個 six | VS | 4個 four |